|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TIP142T TIP147T Complementary power Darlington transistors Features Monolithic Darlington configuration Integrated antiparallel collector-emitter diode TAB Application Linear and switching industrial equipment 1 3 2 Description The devices are manufactured in planar technology with "base island" layout and monolithic Darlington configuration. The resulting transistors show exceptional high gain performance coupled with very low saturation voltage. TO-220 Figure 1. Internal schematic diagrams R1 typ. = 5 k R2 typ. = 60 R1 typ. = 8 k R2 typ. = 100 Table 1. Device summary Marking TIP142T TIP147T Polarity NPN TO-220 Tube PNP Package Packaging Part number TIP142T TIP147T May 2010 Doc ID 4135 Rev 5 1/8 www.st.com 8 Absolute maximum ratings TIP142T, TIP147T 1 Absolute maximum ratings Table 2. Symbol VCBO VCEO VEBO IC ICM IB PTOT TSTG TJ Absolute maximum ratings Parameter Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current Base current Total dissipation at Tcase = 25 C Storage temperature Max. operating junction temperature Value 100 100 5 10 20 0.5 90 -65 to 150 150 Unit V V V A A A W C C Note: For PNP type voltage and current are negative. Table 3. Symbol RthJC Thermal data Parameter Thermal resistance junction-case __max Value 1.4 Unit C/W 2/8 Doc ID 4135 Rev 5 TIP142T, TIP147T Electrical characteristics 2 Electrical characteristics Tcase = 25 C; unless otherwise specified. Table 4. Symbol ICBO ICEO IEBO Electrical characteristics Parameter Collector cut-off current (IE = 0) Collector cut-off current (IB = 0) Emitter cut-off current (IC = 0) Test conditions VCB = 100 V VCE = 50 V VEB = 5 V Min. Typ. Max. 1 2 2 Unit mA mA mA Collector-emitter VCEO(sus)(1) sustaining voltage (IB = 0) VCE(sat)(1) VBE(on)(1) hFE(1) Collector-emitter saturation voltage Base-emitter on voltage DC current gain Resistive load Turn-on time Turn-off time IC = 30 mA IC = 5 A IC = 10 A IC = 10 A IC = 5 A IC = 10 A IB = 10 mA IB = 40 mA VCE = 4 V VCE = 4 V VCE = 4 V 100 2 3 3 1000 500 0.9 4 V V V V ton toff 1. RL = 3 IC = 10 A IB1 = -IB2 = 40 mA s s Pulse test: pulse duration 300 s, duty cycle 2 %. Note: For PNP type voltage and current are negative. Doc ID 4135 Rev 5 3/8 Electrical characteristics TIP142T, TIP147T 2.1 Test circuits Figure 2. Resistive load switching test circuit (NPN type) 1. Fast electronic switch 2. Non-inductive resistor Figure 3. Resistive load switching test circuit (PNP type) 1. Fast electronic switch 2. Non-inductive resistor 4/8 Doc ID 4135 Rev 5 TIP142T, TIP147T Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Doc ID 4135 Rev 5 5/8 Package mechanical data TIP142T, TIP147T TO-220 type A mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 Typ Max 4.60 0.88 1.70 0.70 15.75 0015988_Rev_S 6/8 Doc ID 4135 Rev 5 TIP142T, TIP147T Revision history 4 Revision history Table 5. Date 21-Jun-2004 20-May-2010 Document revision history Revision 4 5 Technology change from epitaxial base to planar base island. Changes Doc ID 4135 Rev 5 7/8 TIP142T, TIP147T Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 4135 Rev 5 |
Price & Availability of TIP142T10 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |